Watteredge, Inc.

Print This Page -
imgcableclampsandinsertsbanner

Cable Clamps & Inserts

imgbackselVarious types of Cable Clamps can be used in conjunction with the Boom Bar System or as stand alone components to secure and restrain cables and hosing. In addition, color coded, molded polyurethane Cable Clamp Inserts can be used with the Cable Clamps to securely hold hosing and cabling without causing damage. Additionally, these inserts may be ordered separately, with steel shells that can be welded to existing components.

Check out our Cable Clamps quick reference chart below:

Part NumberNameDescription
KCCSLD Solid Stand Off Bracket Standard solid cable mount of a 2” riser. 3” x 3” steel base may be bolted or welded directly to fixture or weld tooling.
BBCC Swivel Stand Off Bracket The swivel stand off bracket features a ball bearing swivel joint which allows complete 360° rotation without binding. This clamp may be mounted in any orientation and still maintain smooth rotational movement.
PSB Pivot Swivel Stand Off Bracket In addition to allowing 360° of rotation, this base also allows up to a 70° pivot motion in all directions. If your application requires a solid clamp in an “in-between” orientation, this clamp may also be welded into a fixed position.
KCSDSLD or KCSDSWV Slider Stand Off Bracket This cable clamp features thermoplastic rollers which allow for axial movement of the cable with minimal force and wear causing friction. This clamp can be ordered with a solid base or with the standard swivel base used in the swivel stand off bracket. Note: one size clamp fits cables from 300MCM to 650MCM.
9250 or 9255 2” and 2-1/2” 8 Point Adapter Bases These steel bases allow the easy attachment of any of the above brackets to a 2” or 2-1/2” Boom Bar assembly. This design allows angular positioning of cable clamps in 45° increments.

Check out our Cable Clamp Inserts quick reference chart below:

Part NumberI.D.Color/Cable Size
KCC100 1.00 Green / - MCM
KCC125 1.25 Red / - MCM
KCC34* 2.06 Black / 300-400 MCM
KCC45* 2.38 Yellow / 450-500 MCM
KCC65* 2.60 Orange / 650 MCM
KCCFTB 1.88 Blue / Forked Terminal

*Available in a soft durometer material.

Note - For soft durometer: Add “S”suffix. Ex. KCC34S

Note - For steel shells: Add “-01” suffix. Ex. KCC34-01

 

Don't see the I.D. you need? In addition to the sizes listed above, the inserts can be purchased as purple blanks or machined to a custom size.

Contact Watteredge today to learn more about our Robot Dress products.