1.25” Tube Risers and Mounts

Tube risers and anchor blocks can be used to achieve vertical or lateral offset of cable/hose bundles from their mounting surfaces when dressing robots or creating fixtures. Adjustments to prevent rub abrasion, snagging, pinching or excess weight can be easily made with these components.

	CSI-9220 10 – 10” riser with clamp mounting surface.
	CSI-S-18 – 18” shaft CSI-S-10 – 10” shaft
	CSI-9240 – clamp mount for tube.
	CSI-SAB1 – for lateral adjustment
	CSI-SAB2 – for vertical adjustment
	CSI-SAB3 – anchor block attaches riser to mounting surface.