Modular Clamps

CSI-KCC-SLD-XX
Standard solid mount on 2” riser. Custom riser lengths are available, call for ordering info. 3” x 3” square steel base may be bolted or welded directly to fixture or weld tooling.

CSI-BBCC-XX
Ball bearing swivel allows for complete 360 degree rotation with no excessive pressure points. Clamp may therefore be mounted at whatever angle or attitude suits tooling, even upside down. 3”X 3” square base may be bolted or welded directly to fixture or weld tooling.

CSI-PSB-XX
Ball joint allows full 360 degree swivel, plus 70 degree pivot motion. May be mounted in any position. Clamp may be welded solid once base position is determined, if desired.

Note: For standoff brackets above, replace (XX) suffix with those below for proper insert size:

FTB - Forked terminal bracket (formerly CB 500/650)
34 - (300 & 400 MCM)
45 - (450 & 500 MCM)
65 - (650 MCM)
100 - 1” diameter
125 - 1.25” diameter