Specialty Hose

Fiberglass Steam
This hose was designed with fiberglass tire cord reinforcement for steam
applications up to 100 psi. Used in and around electrical installations,
in Electro - Plating factories and other industries where a non conductive hose is essential for safety reasons.

Hot Tar and Asphalt Hose
Used by road repair crews for applying hot liquid tar to road cracks on roadways. Also used by roofing contractors and petroleum companies to transport hot tar.

Petroleum Discharge
Soft wall petroleum discharge hose used for unloading or loading under pressure or gravity flow. Ease of handling makes this hose ideal when portability is required. Ideal for gas, diesel fuel, hydraulic oils and other petroleum products.

Drop Hose
This hose designed for use by tank trucks with gravity drop unloading of gasoline at service Stations. A lightweight extremely flexible hose, even during cold weather. Suitable for Temperatures minus 40°F to plus 150°F

Tankwagon Hose
Designed for loading and unloading railcars, truck tankers, at refineries under pressure. A flexible hose with smooth cover to minimize friction drag. Suitable for temperatures from minus 40°F to 150°F.

Vapor Recovery
A lightweight very flexible hose used in exhausting or recycling gas and oil
vapours from trucks and tankers during loading and unloading of petroleum products.

Hot Air Blower
Very Flexible hose made with EPDM compound and fiberglass reinforcement to ensure continued resistance to high temperatures of compressors on dry bulk cement, bulk flour trucks etc. Special helix wires embedded to maximize flexibility. For use with air only, not designed to convey hot water or other materials.

Radiator Hose
Many oddball diameters available. This high temperature hose made with heat resistant EPDM compound. Suitable for very hot water and anti-freeze coolants. Also available with EPDM/Silicone hi temperature blend compound, for higher temperature applications such as buses, trucks and off the road vehicles.