Intermediate Water Cooled Cables
Watteredge Intermediate Cables are used in a broad spectrum of industries and applications. These cables are designed and assembled to reach maximum power and reliability for all high current applications. Our line of water cooled cables are available in both standard construction rope lay design and an exclusive concentric construction design. Each is individually designed to meet the particular requirements of the application it will serve.
Rope Lay Design
The rope lay cable is made up of several large copper ropes ranging in size from 1” diameter to 2” diameter. These ropes are laid up around the core of the cable, on a specified pitch length, to maintain its circular shape. Watteredge uses a copper rope with a 24 or 30 AWG strand in its Intermediate Cable Line.
Concentric Lay Design
The Concentric Lay cable is the most efficient cable construction on the market today. It is constructed with several bunches of 7/.064 strand copper wire laid up around the core in a much shorter pitch length than the rope lay cable. This construction permits the use of a heavier base wire size without sacrificing any flexibility. But more importantly, the available cross-sectional area of the copper is utilized to its maximum efficiency, thus providing a cable with the lowest possible AC resistance available anywhere. If maximum power input is important to you, ask us about this exclusive cable design.
Options:
- Bare or Silver Plated Terminals
- Several Standard Hose Options: High Flex, High Abrasion, High Voltage, Bonded Fiberglass, Silicone Coated and many others
- Self Support Spring Bars
- Wear, Splash and Thermal Cover Sleeves
- Scuff hose, Band on Bumpers, Molded Bumpers
Application/Industries (Typical):
- Smelting and Chemical Furnaces
- Graphitizing
- Furnaces
- Glass Melting
- Induction Heating/Furnaces
- Electro-Chemical
- Specialty Switch
- Energy Research
- Ladle Furnace
- ESR and Vacuum Arc Furnaces
Product Resources
- Photo Gallery
