Kickless Welding Cables & Terminals

Watteredge's advanced design in alternate polarity welding cables combines the low reactance feature of an alternate polarity cross-section with a truly unique connection at the terminal end. The result is a high performance, long lasting, welding cable suitable for the high standards of the automotive and resistance welding industries

The positive and negative ropes are positioned alternately throughout the cable and also at the connection point. This produces the lowest possible inductive reactance. Each individual strand of the cable has it own swagged on copper mini-lug. The mini-lugs are then bolted and soldered to the inside end of the terminal. Each terminal half is machined from high conductivity copper forging with a cross-section exceeding the MCM rating of the cable. The arrangement provides excellent conductivity.

Features include:

• "Star" separator maintains strand positioning and equally
  distributed cooling water flow.
• Electrolytic tough pitch annealed, bare copper wire, 30 AWG, herringbone rope construction for greater flexibility and
  reduced wear points.
• High temperature internal and external restraining collars to
  minimize stress in the bending area.
• Lowest inductive reactance to produce over all lower transformer
  KVA demand with greatest overall cable life expectancy.
  

NEW! Hy-Twist

The Watteredge Hy-Twist kickless cable is for manual applications resulting in severe twisting, bending or side to side movement of the cable.
Available in all sizes.

Forked Terminal Connectors
Available in 500/650 MCM.